Solution: Procure and Send Service Archive

Solution: Procure and Send Service Archive

Solution: Check the LEDs on the Connection Box – Green = Power, Red = Warning 

Solution: Procure and Send Service Archive

Solution: Procure and Send Service Archive

Air Pressure is Too High or Too Low

Solution: Check Actual Air Pressure via WebGUI (Diagnosis/Radial Profiles/Pressure) and (Setup/Thickness Gauge Measurement/Minimal Pressure)

Solution: Check Key Must Be Set to RUN

Using WebGUI: OVERVIEW/THICKNESS GAUGE/System, the issue will show FF00 or similar, whereas a properly Communicating CAN Node will show 0507 or similar

Solution: Check CAN Cable Connections; Perform CAN Bus Checks